Advisory MI26/01: Sampling for assessments to the National Medical Imaging Standards
To describe the Commission’s requirements for sampling multi-site imaging practices that use medical imaging at assessment to the National Medical Imaging Standards (Medical Imaging Standards).
| Concept | Detail |
|---|---|
| Advisory number | MI26/01 |
| Version number | 1.0 |
| Publication date | November 2026 |
| Implementation date | TBC |
| Replaces | Nil |
| Compliance | It is mandatory for approved accrediting agencies to implement this Advisory |
| Applicable to |
|
| Key relationship | Medical Imaging Accreditation Scheme |
| Attachment(s) | Example of sampling methodology calculation |
| Note(s) | |
| Responsible officer | National Standards Director Email: AdviceCentre@safetyandquality.gov.au |
| Review date | January 2030 |
Purpose
To describe the Australian Commission on Safety and Quality in Health Care’s (the Commission) requirements for sampling multi-site imaging practices that use medical imaging at assessment to the National Medical Imaging Standards (Medical Imaging Standards).
Issue
Imaging practices seeking accreditation under the Medical Imaging Accreditation Scheme must undertake a routine virtual, on-site, or hybrid (a combination of virtual and on-site) assessment every three years. For more information, refer to the Medical Imaging Accreditation Scheme.
Imaging practices with multiple sites operating under a single governance structure may be eligible for a ‘sample assessment’. This is where a sample of sites are assessed to determine whether the medical imaging provider meets the requirements for accreditation.
To ensure consistency, the Commission has developed a sampling methodology, to be applied by all accrediting agencies for imaging practices using sample assessment.
Requirements
An imaging provider with multiple practices operating under a single governance structure may be eligible to apply to the accrediting agencies for a sample assessment.
A single governance structure means an organisation-wide system under which one governing body, or equivalent accountable person or group, has ultimate accountability for the safety, quality and performance of the medical imaging services provided, with clearly defined roles, responsibilities, delegations, reporting, processes and oversight arrangements applying across all services and locations.
Accrediting agencies must apply a risk‑based approach when selecting a sample for accreditation, in accordance with the Commission’s sampling methodology.
Sampling methodology
Where sampling is approved by the accrediting agency, the following methodology is used for organisations with:
- up to 5 sites – every site is to be assessed
- 6 to 20 sites – five (5) sites plus one-third of the remaining sites are to be assessed, rounded up to the nearest whole number
- 21 to 99 sites – ten (10) sites plus one-quarter of the remaining sites are to be assessed, rounded up to the nearest whole number
- 100 or more sites – the imaging provider may apply to the Commission to have the number of sites that undergo assessment capped at an upper limit, subject to Commission approval based on organisational size and risk profile.
An example of this calculation is provided in Attachment 1.
Assessment of sampled practices will be conducted using both virtual and onsite methods, with 50 percent of sampled practices assessed virtually (rounded up) and the remaining practices assessed onsite.
Steps for selecting the assessment sites
- The sample must include:
- 75% of sites (rounded up) selected based on a risk assessment conducted by the accrediting agency. The risk assessment must take into consideration factors such as (but not limited to)
- previous assessment results
- time elapsed since the site was last assessed
- information from incident reports, complaints and external reports, including their severity and frequency
- performance trends and key quality indicators
- insights gained through discussions with the organisation and sites (including, but not limited to, the complexity and diversity of service provision at each site)
- the provision of higher-risk or more complex services, such as interventional procedures, magnetic resonance imaging (MRI), computed tomography (CT) and nuclear medicine services.
The sample should include an appropriate mix of service types and modalities, including higher-complexity services where relevant.
- 25% of sites selected at random, to ensure a representative sample of the organisation.
- 75% of sites (rounded up) selected based on a risk assessment conducted by the accrediting agency. The risk assessment must take into consideration factors such as (but not limited to)
- Accrediting agencies must select the sample sites independently, without input or influence from the imaging provider. The organisation must be notified of the selected sample sites at least 10 business days prior to assessment. Practices located in remote communities or small rural towns as per the Modified Monash Model (MM5-MM7), should be notified at least 6 weeks prior to assessment.
- Exceptions to the notification requirements in Step 2 may be granted for organisations where staff and patient availability is unpredictable and requires planning, or where advance notice is a condition of entry to the sites.
- Organisations seeking an exemption must submit a written request to the Commission, via their accrediting agency.
- The Commission will consider exceptions on a case-by-case basis, and where applicable, consult with regulators and/or funders before making a determination.
- If approval is granted, the accrediting agency may collaborate with the organisation in implementing Step 1 to maximise access to staff, patients and sites during the assessment, ensuring the assessment can be conducted effectively.
Determining an assessment outcome
- For assessment reporting purposes, the organisation as a whole will be assigned a rating for each relevant action of the Medical Imaging Standards.
- All sites within the organisation must be listed in the accreditation report and testimonial, with the sample sites that were assessed clearly identified.
For further information
Visit the Commission website or contact the Safety and Quality Advice Centre.
Attachment 1 – Example of sampling methodology calculation
| Number of practices | Required Assessments | Example |
|---|---|---|
| Up to 5 | Every practice to be assessed | |
| 6 to 20 | 5 practices, plus one-third of the remaining practices (rounded up) | If 15 practices:
|
| 21 to 99+ | 10 practices, plus one-quarter of the remaining practices (rounded up) | If 40 practices:
|
| 100 or more | May apply to the Commission to cap the number of practices assessed | If 140 practices:
|